Call +305.792.2482

Cork Underlayment

-6mm or 1/4″ Cork – Comes in:

*400 sq. ft. Roll – 4′ x 100′ Linear Feet

*200 sq. ft. Roll – 4′ x 50″ Linear Feet

*Sheets – Each Sheet is 2’x3′ (6 sq. ft. total)

*Come in Cases of 300 sq. ft

*50 Sheets Per Case


-8mm Cork or 5/16″ – Comes in:

*Sheets – Each Sheet is 2′ x 3′ (6 sq. ft. total)

*Comes in Cases of 240 sq. ft.

*40 Sheets Per Case

*Used for Sound Control under tile, wood, marble – used on any 2nd
story building/condo.


-12mm or 1/2″ Cork – Comes In:

*Sheets – Each Sheet is 2′ x 3′ (6 sq. ft. total)

*Comes in Cases of 150 sq. ft.

*25 Sheets Per Case


-5mm or 7/32″ Cork – Comes In:

*400 sq. ft. Roll – 4′ x 100′ Linear Feet

*200 sq. ft. Roll – 4′ x 50′ Linear Feet


-3mm or 1/8″ Cork – Comes In:

*800 sq. ft. Roll – 4′ x 200′ Linear Feet

*200 sq. ft. Roll – 4′ x 50′ Linear Feet

*Primarily used under wood, wood laminate, cork flooring. Has some acoustical value but not usually used for Sound Control.
$0.00

We'll send product in 2 days. Read more...

Call us now for more info about our products.

Return purchased items, get your money back.

Buy this product and earn 10 loyalty points!

Description

Details


CORK ROLLS WITH MICROBAN® ANTIBACTERIAL PROTECTION Cork underlay is a cost effective solution for reducing airborne and impact noise problems. Due to the unique 40 million cells per cubic centimetre honeycomb structure of cork and the special nature of the resin binder, it performs outstandingly under floating and laminated floors, wooden floors, ceramic tiles, natural stone, linoleum and vinyl floors. During the cork agglomeration process an antibacterial additive (Microban®) is added to deliver continuous antibacterial and antifungal protection and contribute significantly to the acoustic performance of floors improving environmental comfort.

MATERIALS:

Granulated cork Polyurethane cork binder Microban® additive

ADVANTAGES:

No Formaldehyde Sufficient compression ratio to avert cracking of tile and grout Protection from existing or future minor stress cracks in subfloors Ease if installation – no curing time or messy mixing required Low height requirement Resistant to moisture Thermal insulation Million of square feet installed failure free Safe and easy to handle and install Effective reduction of impact and airborne sound Increases the thermal comfort of the surface floor High fire resistance, without the release of toxic gases Odourless No harmful chemicals Enhanced built-in lifetime antibacterial protection Meets “Green building” requirements Contains 90% (by weight) of post-industrial recycled content Natural product, recyclable

LIMITATIONS:

Indoor use only Not recommended where hydrostatic pressure exists Not recommended to bridge expansion joints or control joints Not recommended to be used for tiles 4 x 4 or smaller